Kundvagnen Stäng

Kundvagnen är tom

Language
Chatt
Offline
Inga operatörer finns tillgängliga
Chatten är bemannad vardagar mellan kl 08.00-17.00 CET. Övriga tider har du möjlighet att lägga ett meddelande till Kundtjänst nedan.
Skapa konto
Chatt
Offline
Inga operatörer finns tillgängliga
Chatten är bemannad vardagar mellan kl 08.00-17.00 CET. Övriga tider har du möjlighet att lägga ett meddelande till Kundtjänst nedan.
Exkl moms

APC NetShelter SX Deep Enclosure Without Doors - Rack - svart - 42U - 19"

APC NetShelter SX Deep Enclosure Without Doors - Rack - svart - 42U - 19"

Schneider Electric

Artnr: AR3150X610
  • Rack
  • 5 års garanti

Ej i lager

14 020:-

Är du intresserad av finansiering?

442:-/månad

Specifikation

Produktegenskaper

Tillbehör

Extra material

  • Produktbeskrivning

    APC NetShelter SX Deep Enclosure Without Doors - rack - 42U
  • Produkttyp

    Rack
  • Förpackningens innehåll

    Rackutjämningsfötter, sidopaneler, tangenter
  • Färg

    Svart
  • Stativstorlek

    19"
  • Höjd (U-format)

    42U
  • Produktmaterial

    Stål
  • Dimensioner (BxDxH)

    60 cm x 107 cm x 199.1 cm
  • Vikt

    125.09 kg
  • Egenskaper

    Hjul, tangentlås, integrerad kabelhantering
  • Tillverkarens garanti

    5 års garanti
  • UNSPSC

    24102001 Rack systems for rack mount electronic equipment
  • Allmänt

  • Produkttyp

    Rack
  • Produktmaterial

    Stål
  • Förpackningens innehåll

    Rackutjämningsfötter, sidopaneler, tangenter
  • Stativstorlek

    19"
  • Höjd (U-format)

    42U
  • Bredd

    60 cm
  • Djup

    107 cm
  • Höjd

    199.1 cm
  • Vikt

    125.09 kg
  • Färg

    Svart
  • Diverse

  • Viktgräns

    1363.64 kg
  • Monteringssats

    Inkluderat
  • Egenskaper

    Hjul, tangentlås, integrerad kabelhantering
  • Standarder som följs

    EIA-310-E, UL 60950, RoHS
  • Tillverkarens garanti

  • Service och support

    Begränsad garanti - utbyte - 5 år

Optimerad för kabelhanteringssystem med hög kapacitet


NetShelter SX enclosures are optimized for use with high capacity cable management systems that attach to equipment mounting rails inside enclosures aligning with equipment mounting u-spaces and provide channels for routing and managing cabling

Förinstallerade åtkomstkanaler för hela skåphöjden


Integrated and adjustable rear accessory channel provides zero U mounting locations for toolless accessories. Each channel has two mounting bays to support a combination of up to four accessories such as PDUs and vertical cable organizers. 1070mm (42in), 825mm (32 in), and deep enclosures and networking enclosures include two channels. 1200mm (48in) deep enclosures include four channels. Channels are pre-installed at the factory in the rear of the enclosure but can be moved to other locations of the enclosure along the side brace to resituate cable management where it is needed most

Kompatibel med Schneider Electrics racksystem


Compatible with a variety of Schneider Electric rack accessory products to provide the ability to create a complete rack system. Configure rack solutions using industry leading Schneider Electric Design Portal - Small IT Solution Designer configurator complete with verification of product compatibility and useful 3rd party equipment catalog to aid in visualizing your ideal rack solution

Enkelt urval


No need to spend hours choosing from and compiling dozens of part numbers to create a single enclosure. Schneider Electric has made it easy by handling the details and providing complete enclosures with single part numbers

Tillverkaroberoende EIA-310 19 in garanterad kompatibilitet för rackmontering


Vendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19" equipment. The "Fits Like a Glove" money back guarantee provides peace of mind that all of your EIA-310-E compliant rack-mount equipment will physically fit in a NetShelter

Integrerad med InfraStruXure-produkter


Schneider Electric cooling, power distribution, and cable management products work seamlessly with IT enclosures to provide a complete infrastructure support system

Särskilda förpackningsalternativ för transport av rack med monterad utrustning


Enclosures with shock packaging are standard enclosures with provisions in the packaging design and enclosure assembly for shipping the enclosures with equipment mounted inside. Check apc.com for enclosure size options and availability

Justerbara monteringsskenor med fästanordningar och snabb inpassning


The vertical mounting rails can be adjusted in 1/4 in (6.4 mm) increments covering virtually any mounting requirement for IT equipment. Easy alignment feature integrated into the enclosure mounting rail and side brace for quick alignment verification without the use of tools to verify alignment. U positions are numbered front and back for rapid installation of equipment

Öppningar för kabelåtkomst med förinstallerade borstar


Large cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor. Roof includes openings with brush strips pre-installed in locations biased towards the front of the enclosure to allow for data cable passthrough and provisions for air containment

Utformad för ökad strukturstabilitet


A proven frame design, heavy-gauge mounting rails, and heavy-duty casters provide for 3000 lb (1364 kg) static (levelling feet) and 2250 lb (1023 kg) dynamic (castor) load ratings. Enclosures have been tested and approved to be combined with proper bolt down accessories to meet various seismic requirements. Check apc.com for product documentation for specific requirements

Enkelt avtagbart tak för kabelåtkomst


Roof can be removed with simple pull-pin hinges for access during equipment installation or even with cabling already in place and routed through the cable openings. Once removed the roof is reversible to reposition the larger cable openings for power distribution plugs and connectors

Verktyg för justering av skåp och maskinvara medföljer


All enclosures are provided standard with hardware bag that includes hardware for mounting IT equipment and tools for simple enclosure adjustment

Alternativ för skåpmontering enligt önskemål (ATO) finns tillgängliga


The Enclosure ATO (Assemble-to-Order) options provide a level of customization for enclosure customers beyond the standard enclosure models. This customization is limited to the assembly of the enclosure itself and does not include additional enclosure mounted components. For example, the enclosure can be assembled without sides, doors, or without sides and doors. Check apc.com for enclosure size options and availability

Utrustningens monteringsskenor anpassade till patchkabelsystem


Equipment mounting rails include zero U mounting holes beside the EIA 19" mounting space that allow the installation of Data Distribution Cable (DDC) patch systems without taking up any critical equipment U-space. AV and Networking enclosure designs do not include hole locations for integration of DDC cabling. Other 1U, 2U, and rear enclosure zero U options are available for use with these enclosures

Ögelbultstöd integrerat i skåpstommen


Integrated eyebolt holes at the top of the enclosure frame allow the enclosure to be lifted for movement and enclosure placement using eyebolt lifting mechanisms. Refer to enclosure user documentation for detailed specifications on eyebolt requirements and enclosure weight limits

Halvhöga sidopaneler och alternativ med borstremsor för genomföring


Half-height quick release side panels reduce size and weight for easy handling and access to equipment. Side panels are lockable utilizing a single key with the doors. Now available are side panel options integrated with pass-through holes and brush strips for routing cabling to adjacent racks in a row while still maintaining proper airfow

Inbyggd jordanslutning


The roof, side panels and front and rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding

Integrerade hopsättningsdetaljer med kapslingspassning för multipel bredd


Enclosures include pre-installed joining hardware to join enclosures in a row and provide additional stability to the enclosure. The pre-installed joining hardware includes holes for joining to an adjacent enclosure at 600mm centers or 24in centers depending upon the floor layout

Låga hjul och nivåjusteringsfötter från under- eller ovansidan


Enclosures are shipped standard with both leveling feet and castors. Leveling feet can be quickly adjusted through the use of a screwdriver or drill, eliminating the need to reach underneath with a wrench